Gravely Street Legal Kits


Gravely Atlas JSV LED Turn Signal Kit #105


Gravely Street Legal Kits

Looking for Gravely street legal kits to make your Gravely Atlas JSV street legal?  You have come to the right place!  Hence, we have developed D.O.T. approved Gravely street legal kits that will help you make your UTV (side-by-side) or ATV (quad) street legal.

For instance, having a Street Legal Gravely Atlas JSV is just awesome.  In other words with the right Gravely street legal kits, you can really tackle every type of terrain.  That is to say you can go from pavement, to off-road trails and back again.  Subsequently we build the Gravely street legal kits and accessories you need.  Consequently to make your UTV (side-by-side) or ATV (quad) street legal.  For instance, D.O.T. approved Horn Kits, LED Lighted License Plate Brackets and LED Turn Signal Kits.  As a result you can safely and effectively ride on the streets in your area.


Gravely Street Legal Kits D.O.T. Requirements

Our Gravely Street Legal Kits are intended to help you convert your off-road UTV (side-by-side) or ATV (quad) to a street legal ride in many states.  In addition our kits include parts that are actually D.O.T. approved items.  That is to say, you will need these while converting your off-road recreational vehicle to street legal status.  Be careful, as some of our competitors out their Do Not use D.O.T. approved parts.  Consequently they will sell you a kit that it is not D.O.T. approved.

All states have their own D.O.T. requirements for street legal equipment.  On the other hand, check with your local Department of Motor Vehicles (DMV) or Motor Vehicle Division (MVD).  Certainly get the information for your local requirements.  Furthermore, most states require a Horn (120 db+), Lighted License Plate and Turn Signals. However, not all states require turn signals (hand signals are ok).  Above all, we highly recommend turn signals for your added safety.  That is to say, we know through experience that some drivers DO NOT know what hand signals are.


Why Our Gravely Street Legal Kits are Completely Independent

I get asked a few times every month, why don’t you use the UTV or ATV rear OEM lights for the rear turn signalsThe answer is very simple.  I developed my Turn Signal Kits (TSK) to be completely independent for THREE main reasonsONE, you do not want any possible feedback from the LED Electronic Flasher into the ECU of your UTV or ATV.  Consequently, electronic feedback can cause problems with your ECU and they are very expensive to replace.  TWO, you do not want to affect (invalidate) your manufactures warranty by tapping into any existing OEM lights or wiringTHREE, you want both rear stop lights when activating the turn signals (like our automobiles), not just one.  As a result, with all my different Gravely street legal kits you will never have these concerns or issues.


Get Only What Gravely Street Legal Kits You Need!

For example, you may only need turn signals + a license plate bracket, because you already have a horn.  Therefore we make the Gravely street legal kits separate so you can order just what you need or want.


Gravely Street Legal Kits

Horn Kit

(Stock #310) / (Price: $39.95)

Polaris Ranger XP Horn Kit #310

The Loud FIAMM 12 Volt Horn Kit is one of our ATV and UTV Gravely street legal kits.  First of all this horn kit is for making your recreational vehicle street legal or letting those around you know you’re there.  Furthermore, most states require the horn to be 120 db or more, ours is 130 db, very loud, legal and D.O.T. approved in all states.  In addition this 12 volt horn kit comes complete with all the parts, wiring and instructions with diagrams.

We use a FIAMM horn in our kit.  Above all FIAMM is recognized as the world’s leading producer of horns.  Most importantly the smaller size makes it easy to install.  Even more, on any ATV (quad) or UTV (side-by-side), and with great quality for a loud sound.  In addition it exceeds the S.A.E. and O.E.M. specifications for a wide range of vehicle applications.


Gravely Street Legal Kits Horn Installation

This kit can be easily installed in about 30 minutes, it does not go into any factory wiring and above all it will not void your manufactures warranty!  In addition, there is no cutting or splicing and it comes with all parts needed for your install.  Note: First of all, you need to drill a 3/16th inch hole (or use an existing hole) in the frame to mount the FIAMM horn.  In addition, drill a 1/2″ inch hole in the dash to mount the horn button.  Finally, this horn kit is pretty much plug-n-play and is very simple to install.

Read More & Add to Cart

Customer Reviews Horn Kit #310



Gravely Street Legal Kits

LED License Plate Bracket

(Stock #312) / (Price: $18.95)

LED License Plate Bracket #312

The LED Lighted License Plate Bracket is one of our ATV and UTV Arctic Cat street legal kits.  Consequently this is for making your recreational vehicle street legal in those states requiring a 7″ x 4″ license plate.  Furthermore, the License Plate Bracket comes complete with the mounting hardware, extra wire, connectors, wire ties and the installation/wiring instructions.  In addition the LED license plate bracket can be easily installed in less than 30 minutes.


Gravely Street Legal Kits LPB Specifications

This is a 12 volt LED chrome-plated license plate light with rust proof non-corrosive black polymer (plastic) license plate bracket.  Firstly, the LED light includes both power (+) and ground (-) wires.  In other words the bracket can be mounted to any surface.  Secondly, the LED license plate light will last years with no bulbs to vibrate loose or burn out.  Thirdly, the Sturdy Rust Proof Non-corrosive Plastic Frame has 2 sets of mounting holes for attachment to your UTV or ATV.  Their are 2 wire leads, so you can mount the bracket anywhere on the rear of your UTV or ATV.  Finally, it will hold your 7” x 4” license plate to make your UTV or ATV Gravely Street Legal in those states requiring a license plate.

Read More & Add to Cart

Customer Reviews LED License Plate Bracket #312



Gravely Street Legal Kits

Column Mounted (TSS) Hardware Notes

Gravely Atlas JSV Turn Signal Switch


2014-19 Gravely Atlas JSV models (TSS) Mounting Hardware Notes

The 2014-19 Gravely Atlas JSV models with Tilt Steering use our Custom Turn Signal Switch (TSS) Mounting Strap.  That is to say this custom strap will allow the tilt steering to have full range of motion.  Meanwhile the turn signal switch is mounted just under the steering wheel.  Used with our stock #105 LED Turn Signal Kit.  As a result, order from the drop down box Turn Signal Switch Mounting Hardware.

  • 14-19 Gravely Atlas JSV 3000 (RNG) Strap
  • 14-19 Gravely Atlas JSV 6000 (RNG) Strap



Gravely Street Legal Kits

LED Turn Signal Kit

(Stock #105) / (Base Price: $149.95)

Gravely Atlas JSV LED Turn Signal Kit #105

This is a 12 volt LED Turn Signal Kit with 2 Amber (front) and 2 Red (rear) or your choice of all Amber D.O.T. approved LED lights.  Our LED light kit comes with two 4″x 2″ inch rectangular amber (front) and two 4″x 2″ inch rectangular red (rear) LED lights.


Gravely Street Legal Kits Specifications

This LED light kit comes with a column mounted turn signal switch.  First of all, it has a pilot light for the turn signals and 4-way emergency flashers (hazard warning).  Secondly, our turn signal switch has a pull out flare tab for the 4-way hazard lights.  Finally, it comes with the hardware to mount it to your steering column.

The four LED Lights are 4”x 2” rectangular with 16 (LED) Light Emitting Diodes each.  In addition, they have a polycarbonate lens & housing and come with encapsulated electronics to eliminate corrosion.

This special LED Flasher has the 3 pin connections for LOAD, PILOT and POWER.  Also, the electronic LED flasher is quite, no annoying clicking sounds.

Our kit includes:  2 Amber and 2 Red or all Amber D.O.T. approved LED lights.  Secondly, the turn Signal Switch and the hardware to mount it to your steering column (see TSS mounting hardware notes above).  Furthermore, the LED Flasher, an ATC in-line fuse holder with a 3 amp fuse.  Also, the self tapping screws for mounting the lights and flasher.  In addition, the mounting installation instructions with wiring instructions & diagram.   Most importantly, with our Gravely street legal kits you get all the help and support you need from EZ Turn Signal Kits.


Important Note

Note FYI:  I have heard people say that a column mounted Turn Signal Switch (TSS) is in the way of you entering and exiting the unit, not true!  Secondly, they say you will bump the TSS lever with your legs and even break that lever, again not true!  In other words, I am 6’3″ and 250 pounds, I have never bumped the TSS and I use my units multiple times a day.  Finally, I have sold thousands of the column mounted TSS and never had a customer complain about bumping or breaking one.


Gravely Street Legal Kits Installation

This kit can be easily installed, it does not go into any factory wiring and above all it will not void your manufactures warranty!  In addition, each wire has a different color and the wiring diagram shows where each colored wire goes.  Above all, I include my phone number and e-mail address with the instructions.  Therefore, if you have any questions about your installation you can contact me.

This turn signal switch has been installed on thousands of units, very nice and easy to operate.  The Motor Vehicle Department and your local police departments will be impressed.  Most noteworthy, everyone who rides on the street or off road (dunes/congested areas), should have turn signals for their added safety.

The LED Turn Signal Kit will fit all of the Gravely Atlas models (check the TSS mounting hardware notes above).

In addition you may like amber lights front and rear, order from the drop down box Light Options:  Amber Kit: All 4 Amber lights.


Gravely Street Legal Kits Options

LED Turn Signal Kit #105 Options:

We have some Custom Kit Brackets, UTV Wire & Connector Kit and Dash Indicators.  Therefore, you may want to use these with your LED Turn Signal Kit.  That is to say, any of these options purchased with your kit, will save you time & money!

Option1 – Your choice of lights to make your UTV have a custom look.

Option2 – Turn Signal Switch (TSS) mounting hardware for your particular year, make and model.

Option3 – If you don’t have a rear bumper, you might want to use our Rear T-Brackets (4″ x 2″ lights only).

Option4 – UTV Wire and Connector Kit, to clarify this kit will make it easy to connect your turn signals.

Option5 – Dash Indicators for those that want one or two dash indicators.

You can order whatever options you want with your Turn Signal Kit by using the drop down (∇) menus.


Choose Your Options & Add to Cart

Choose Your Options & Add to Cart

Customer Reviews LED Turn Signal Kit #105


Please let us know if you have any questions or need assistance, you can call us at (843) 725-8890 or send an e-mail to


Have you seen the Gravely models?