Gravely Atlas Turn Signals


Gravely Atlas JSV LED Turn Signal Kit #105


Gravely Atlas Turn Signals

Looking for Gravely Atlas turn signals to make your Gravely Atlas street legal.  You have come to the right place!  Hence, we have developed D.O.T. approved Gravely Atlas turn signals.  To clarify, our kits will help you make your UTV (side-by-side) street legal.

For instance, having a Street Legal Gravely Atlas UTV is just awesome.  In other words, with the right Gravely Atlas turn signals, you can really tackle every type of terrain.  That is to say you can go from pavement, to off-road trails and back again.  Subsequently, we build the Gravely Atlas turn signals and accessories you need.  For instance, D.O.T. approved LED Turn Signal Kits, Horn Kits and LED Lighted License Plate Brackets.  As a result you can safely and effectively ride on the streets in your area.


D.O.T. Approved Gravely Atlas Turn Signals

The Gravely Atlas Turn Signals are intended to help you convert your off-road UTV (side-by-side) to a street legal ride in many states.  In addition our kits include parts that are actually D.O.T. approved items.  That is to say, you will need these while converting your off-road recreational vehicle to street legal status.  Meanwhile, be careful as some of our competitors out their Do Not use D.O.T. approved parts.  Consequently, they will sell you a Gravely Atlas turn signals kit that it is not D.O.T. approved.

All states have their own D.O.T. requirements for street legal equipment.  Most importantly, check with your local Department of Motor Vehicles (DMV) or Motor Vehicle Division (MVD).  Certainly get the information for your local requirements.  Furthermore, most states require a Horn (120 db+), Lighted License Plate and Turn Signals.  However, not all states require turn signals (hand signals are ok).  Above all, we highly recommend turn signals for your added safety.  That is to say, we know through experience that some drivers DO NOT know what hand signals are.


Why Our Gravely Atlas Turn Signals are Completely Independent

I get asked a few times every month, why don’t you use the Gravely Atlas rear OEM lights for the rear turn signalsThe answer is very simple.  I developed my Turn Signal Kits (TSK) to be completely independent for THREE main reasonsONE, you do not want any possible feedback from the LED Electronic Flasher into the ECU of your UTV.  Consequently, electronic feedback can cause problems with your ECU and they are very expensive to replace.  TWO, you do not want to affect (invalidate) your manufactures warranty by tapping into any existing OEM lights or wiringTHREE, you want both rear stop lights when activating the turn signals (like our automobiles), not just one.  As a result, with all my different Gravely Atlas turn signal kits you will never have these concerns or issues.


Gravely Atlas Turn Signals

Column Mounted (TSS) Hardware Notes

Gravely Atlas JSV Turn Signal Switch


2014-19 Gravely Atlas JSV models (TSS) Mounting Hardware Notes

The 2014-19 Gravely Atlas JSV models with Tilt Steering use our Custom Turn Signal Switch (TSS) Mounting Strap.  That is to say this custom strap will allow the tilt steering to have full range of motion.  Meanwhile the turn signal switch is mounted just under the steering wheel.  Used with our stock #105 LED Turn Signal Kit.  As a result, order from the drop down box Turn Signal Switch Mounting Hardware.

  • 14-19 Gravely Atlas JSV 3000 (RNG) Strap
  • 14-19 Gravely Atlas JSV 6000 (RNG) Strap



Gravely Atlas Turn Signals

LED Turn Signal Kit

(Stock# 105) / (Base Price: $149.95)

Gravely Atlas JSV LED Turn Signal Kit #105

This is a 12 volt LED Turn Signal Kit with 2 Amber (front) and 2 Red (rear) or your choice of all Amber D.O.T. approved LED lights.  Our LED light kit comes with two 4″x 2″ inch rectangular amber (front) and two 4″x 2″ inch rectangular red (rear) LED lights.


Gravely Atlas Turn Signals Specifications

This LED light kit comes with a column mounted turn signal switch.  First of all, it has a pilot light for the turn signals and 4-way emergency flashers (hazard warning).  Secondly, our turn signal switch has a pull out flare tab for the 4-way hazard lights.  Finally, it comes with the hardware to mount it to your steering column.

The four LED Lights are 4”x 2” rectangular with 16 (LED) Light Emitting Diodes each.  In addition, they have a polycarbonate lens & housing and come with encapsulated electronics to eliminate corrosion.

This special LED Flasher has the 3 pin connections for LOAD, PILOT and POWER.  Also, the electronic LED flasher is quite, no annoying clicking sounds.

Our kit includes:  2 Amber and 2 Red or all Amber D.O.T. approved LED lights.  Secondly, the turn Signal Switch and the hardware to mount it to your steering column (see TSS mounting hardware notes above).  Furthermore, the LED Flasher, an ATC in-line fuse holder with a 3 amp fuse.  Also, the self tapping screws for mounting the lights and flasher.  In addition, the mounting installation instructions with wiring instructions & diagram.  Most importantly, with our Gravely Atlas turn signals you get all the help and support you need from EZ Turn Signal Kits.


Important Note

Note FYII have heard people say that a column mounted Turn Signal Switch (TSS) is in the way of you entering and exiting the unit, not true!  Secondly, they say you will bump the TSS lever with your legs and even break that lever, again not true!  In other words, I am 6’3″ and 250 pounds, I have never bumped the TSS and I use my units multiple times a day.  Finally, I have sold thousands of the column mounted TSS and never had a customer complain about bumping or breaking one.


Gravely Atlas Turn Signals Installation

This kit can be easily installed, it does not go into any factory wiring and above all it will not void your manufactures warranty!  In addition, each wire has a different color and the wiring diagram shows where each colored wire goes.  Above all, I include my phone number and e-mail address with the instructions.  Therefore, if you have any questions about your installation you can contact me.

This turn signal switch has been installed on thousands of units, very nice and easy to operate.  The Motor Vehicle Department and your local police departments will be impressed.  Most noteworthy, everyone who rides on the street or off road (dunes/congested areas), should have turn signals for their added safety.

The LED Turn Signal Kit will fit all of the Gravely Atlas models (check the TSS mounting hardware notes above).

In addition you may like amber lights front and rear, order from the drop down box Light Options:  Amber Kit: All 4 Amber lights.


Gravely Atlas Turn Signals Options

LED Turn Signal Kit #105 Options:

We have some Custom Kit Brackets, UTV Wire & Connector Kit and Dash Indicators.  Therefore, you may want to use these with your LED Turn Signal Kit.  That is to say, any of these options purchased with your kit, will save you time & money!

Option1 – Your choice of lights to make your UTV have a custom look.

Option2 – Turn Signal Switch (TSS) mounting hardware for your particular year, make and model.

Option3 – If you don’t have a rear bumper, you might want to use our Rear T-Brackets (4″ x 2″ lights only).

Option4 – UTV Wire and Connector Kit, to clarify this kit will make it easy to connect your turn signals.

Option5 – Dash Indicators for those that want one or two dash indicators.

You can order whatever options you want with your Turn Signal Kit by using the drop down (∇) menus.


Choose Your Options & Add to Cart

Choose Your Options & Add to Cart

Customer Reviews LED Turn Signal Kit #105


Please let us know if you have any questions or need assistance, you can call us at (843) 725-8890 or send an e-mail to


In addition, have you seen our Gravely Street Legal Kits?

Have you seen the Gravely models?